基于飞行数据分析的发动机故障诊断系统研究

依据现有的发动机故障诊断方法,研究发动机故障诊断系统,通过对飞行数据中反映发动机性能指标的关键参数数据进行分析,说明系统对航空发动机故障诊断的可行性和必要性,研究结果对于提高发动机维护的快速性和准确性具有重要意义.     

Event-triggered attitude control of spacecraft

The problem of spacecraft attitude stabilization control system with limited communication and external disturbances is investigated based on an event-triggered control scheme. In the proposed scheme, information of attitude and control torque only need to be transmitted at some discrete triggered times when a defined measurement error exceeds a state-dependent threshold. The proposed control scheme not only guarantees that spacecraft attitude control errors converge toward a small invariant set containing the origin, but also ensures that there is no accumulation of triggering instants. The performance of the proposed control scheme is demonstrated through numerical simulation.     

针栓式推力室冷却特性试验研究

针栓式发动机具有推力调节简单、声学燃烧稳定性好和成本低廉等一系列优点,但目前对针栓式推力室的冷却特性掌握还不够深入,研制过程中曾多次出现因推力室冷却组织不好而烧蚀的问题。采用针栓式推力室试验件,对身部的冷却特性进行了深入研究,结果表明:推力室圆柱段前端的温度较低,无需采用专门的冷却措施;末端内侧气壁温度会达到约1650℃,局部存在明显的烧蚀现象,必须采取有效的热防护措施;下游冷却液膜量的变化对圆柱段的冷却特性影响较小。     

谱估计理论在弹道数据参数化建模中的应用

针对高超声速飞行器防御作战中目标运动规律的描述问题，提出一种基于经典和现代谱估计理论的弹道数据参数化分析和建模方法。该方法将弹道数据视作非平稳随机信号，研究其变化规律：首先，通过线性消势法消除信号的线性趋势，将其转变为平稳信号，以便于进行谱估计；然后，采用Welch算法给出大致的谱图，结合该谱图和改进的协方差法确定自回归参数模型的阶数，以避免模型阶数选择准则引起的不确定性问题；最终，给出弹道数据的参数化模型。仿真结果表明，使用本文算法建立的弹道数据参数化模型与动力学模型具有较高的一 致性。     

Generalized Kutta–Joukowski theorem for multi-vortex and multi-airfoil flow with vortex production——A general model

By using a special momentum approach and with the help of interchange between singularity velocity and induced flow velocity, we derive in a physical way explicit force formulas for twodimensional inviscid flow involving multiple bound and free vortices, multiple airfoils, and vortex production. These force formulas hold individually for each airfoil thus allowing for force decomposition, and the contributions to forces from singularities(such as bound and image vortices,sources, and doublets) and bodies out of an airfoil are related to their induced velocities at the locations of singularities inside this airfoil. The force contribution due to vortex production is related to the vortex production rate and the distance between each pair of vortices in production, thus frameindependent. The formulas are validated against a number of standard problems. These force formulas, which generalize the classic Kutta–Joukowski theorem(for a single bound vortex) and the recent generalized Lagally theorem(for problems without a bound vortex and vortex production) to more general cases, can be used to identify or understand the roles of outside vortices and bodies on the forces of the actual body, optimize arrangement of outside vortices and bodies for force enhancement or reduction, and derive analytical force formulas once the flow field is given or known.     

回流燃烧室流动特性试验

为了揭示有/无燃烧状态下燃烧室热态和冷态流场的特征和流动特性，针对某型回流燃烧室单头部试验件，使用粒子图像测速仪（PIV），测量燃烧室燃烧状态下不同截面处的热态流场，以及没有燃烧状态下不同截面处的冷态流场，探讨不同总压损失系数对回流燃烧室热态/冷态流场特征及流动特性的影响。研究表明:随着总压损失系数的增大，冷态条件下各截面流场结构基本保持不变，如射流孔穿透深度、射流角度、回流区位置及大小、流线等基本保持一致，但是各位置点速度大小逐渐增大。热态条件下各截面流场随着总压损失系数增大，流场结构也基本保持不变；相同总压损失系数时，热态流场与冷态流场存在差异，燃油喷射与气流的相对运动将会对燃烧室头部的流场结构造成影响，速度较冷态流动时略微增大。      

RN-FD型固体氡气源的稳定性及应用分析

对测氡仪器进行精确校准是氡测量工作中的重要环节,固体氡气源的稳定性、可靠性在校准中则显得至关重要。本文通过分析RN-FD型固体氡气源对闪烁室K值的稳定性实验结果,认为:RN-FD型固体氡气源标称的浓度值与实际浓度值不一致,标称浓度值只是理论浓度值而不是实际浓度值,需重新刻度才能使用;RN-FD型固体氡气源抽气循环时间不同则浓度不同,但抽气循环时间固定,观测结果比较稳定;对于没有α检查源的台站,RN-FD型固体氡气源可用于氡观测仪器坪区检查。